Clean the product, Clean the scanning strips – HP ScanJet Enterprise Flow 5000 s4 User Manual
Page 42
Clean the product
Occasional cleaning of the scanner helps ensure high-quality scans. The amount of care necessary depends
on several factors, including the amount of use and the environment. Perform routine cleaning as necessary.
Clean the scanning strips
To clean the scanning strip components, follow these steps:
1.
Press the Power button to turn off the scanner, and then disconnect the USB cable and power supply
from the scanner.
2.
Pull forward on the latch to open the document feeder hatch.
3.
Clean the scanning strips with a soft, lint-free cloth that has been sprayed with a mild glass cleaner.
CAUTION:
Use only glass cleaner to clean the scanning strips. Avoid cleaners that contain abrasives,
acetone, benzene, and carbon tetrachloride, all of which can damage the scanning strips. Avoid
isopropyl alcohol because it can leave streaks on the scanning strips.
Do not spray the glass cleaner directly on the scanning strips.
34
Chapter 3 Care and maintenance
ENWW