Lcd issues, The lcd is having display issues, The scanner buttons are not working as expected – HP ScanJet Enterprise Flow 5000 s4 User Manual

Page 64: Scanning performance issues, Scanner does not scan immediately, Scanner is scanning items very slowly

Advertising
background image

3.

Restart the computer.

4.

If the problem still persists, there might be a problem with the control panel. Contact HP Support at

www.hp.com/go/sj5000s4

or

www.hp.com/go/sj7000s3

.

LCD issues

The LCD is having display issues

The following symptoms indicate a problem with the scanner control panel.

LCD issues: The display is blank, or part of the display content is missing.

LED issues: LEDs are not working, or are staying in the wrong state.

If the scanner exhibits any of these problems, contact HP support at

www.hp.com/support

.

The scanner buttons are not working as expected

The following symptoms indicate a problem with the scanner control panel.

Button issues: Buttons are unresponsive, or the wrong action occurs when you press a button. For

example, you get a single-sided scan when you press the Duplex Scan button.

LED issues: LEDs are not working, or are staying in the wrong state.

If the scanner exhibits any of these problems, contact HP support at

www.hp.com/support

.

Scanning performance issues

Scanner does not scan immediately

Make sure that the document feeder hatch is closed, and that the scanner is turned on.

Scanner is scanning items very slowly

When scanning to edit text, the optical character recognition (OCR) causes the scanner to scan more slowly,

which is normal. Wait for the item to scan.

NOTE:

For the best OCR results, scanner compression should be set to the minimum compression level or

be disabled.

Scanning at a higher resolution than necessary increases scanning time and creates a larger file with no

additional benefit. If you are scanning at a high resolution, set the resolution to a lower level to increase

scanning speed.

Scanner scans only one side of a two-sided page

Verify that the selected scan shortcut specifies two-sided scanning.

Scanned pages are missing at the scan destination

When scanning, pages that stick together are scanned as one item. Check to confirm that scanned pages are

not stuck together.

56

Chapter 4 Solve problems

ENWW

Advertising
This manual is related to the following products: