ProSoft Technology PS69-DPS - Manual (Page 37)

PS69-DPS ♦ CompactLogix or MicroLogix Platform Configuration and Start-Up
Profibus DP Slave Communication Module User Manual
ProSoft Technology, Inc. Page 37 of 108
May 9, 2014
2 Configuration and Start-Up
In This Chapter
 RSLogix 5000 ........................................................................................ 38
 RSLogix 500 .......................................................................................... 42
 Slave Configuration ............................................................................... 45
The following sections will describe the individual steps for configuration and
start-up of the PS69-DPS module. Install the PROFIBUS Slave module into a
free slot in the CompactLogix or MicroLogix controller. Information regarding
installation of communication modules in CompactLogix or MicroLogix systems
can be found in the section Installation and Wiring or in the Rockwell installation
manual for the appropriate controller system. The slave module must be within 6
modules of the I/O bank's power supply.
 Configuration and parameterization of the module is carried out in three steps
 Configuration of the module in a CompactLogix or MicroLogix project of the
RSLogix5000 or RSLogix 500 programming tool.
 Determine configuration method to be used by the Slave module during
startup.
 Creating the data objects and the ladder diagram in RSLogix5000