ProSoft Technology PS69-DPS - Manual (Page 62)

Reference PS69-DPS ♦ CompactLogix or MicroLogix Platform
User Manual Profibus DP Slave Communication Module
Page 62 of 108 ProSoft Technology, Inc.
May 9, 2014
5.1 Specifications
The PS69- DPS module expands the functionality of Rockwell Automation’s
CompactLogix or MicroLogix to include PROFIBUS DP V0/V1. The PS69-DPS is
a more cost-effective option offering more features than the PS69-PDPS, and
supports both I/O control and messaging. Explicit ladder logic CIP message
blocks provide slave status diagnostic data and acyclic messaging.
The PS69-DPS interface appears to the CompactLogix or MicroLogix controller
as a standard I/O module allowing it to be configured via RSLogix5000, or
configuration can be transferred from the Master to the PS69-DPS. For third
party configuration a GSD file is supplied. The slave interface possesses a
diagnostic interface and has rotary switches for setting of the bus address.
Complete program examples for simple and quick start-up are available.
Each module is equipped with LEDs to display communication and device status.
5.1.1 General Specifications
 Single Slot - 1769 backplane compatible
 The module is recognized as an Input/Output module and has access to
processor memory for data transfer between processor and module
 Ladder Logic is used for data transfer between module and processor.
Sample ladder file included.
 Configuration data obtained from configuration text file downloaded to
module. Sample configuration file included.
 Supports all CompactLogix processors: L20/L30/L31/L32/L35 and L43 (L43
supported with RSLogix 5000 v16)
 Also supports MicroLogix 1500 LRP