ProSoft Technology PS69-DPS - Manual (Page 41)

PS69-DPS ♦ CompactLogix or MicroLogix Platform Configuration and Start-Up
Profibus DP Slave Communication Module User Manual
ProSoft Technology, Inc. Page 41 of 108
May 9, 2014
2.1.3 Module Properties 2
The Requested Packet Interval RPI is shown in the following dialog box. Within
this time interval, the I/O data between module and controller are exchanged.
It is not possible to change the RPI in this dialog separately for each module. The
RPI can be changed in the properties dialog of the "CompactBus Local" for all I/O
modules. Values in 1.0 ms steps are possible. The PROFIBUS PS69-DPS
module supports all possible RPI values.
End the configuration of the module with Finish>>.