Document Outline

• Table of Contents
• Chapter 1 MVS-6000 Functions
  • Introduction
  • Features of the MVS-6000 Multi Format Switcher System
  • Basic Video Processing
    • Transitions
    • Keys
    • Wipes
    • DME Wipes
    • Frame Memory
    • Color Backgrounds
    • Copy and Swap
    • Video Process
    • Color Corrector
    • Side Flags
    • Simple P/P Software
  • Creation of Special Effects and Management of Data and Operations
    • Digital Multi Effects (DME)
    • External Devices
    • Keyframes
    • Snapshots
    • Utility
    • Shotbox
    • Macros
    • Files
  • Setup
• Chapter 2 Menus and Control Panel
  • Names and Functions of Parts of the Control Panel
    • Example Control Panel Configuration
    • Cross-Point Control Block
    • Transition Control Block
    • Device Control Block (Joystick)
    • Keyframe Control Block
    • Numeric Keypad Control Block
    • Auxiliary Bus Control Block
    • Menu Control Block
    • Memory Card/USB Adaptor Block
    • “Memory Stick”/USB Connections Block
    • Key Control Block (MKS-8035 Key Control Module, Option)
    • Device Control Block (MKS-8031TB Trackball Module, Option)
    • Device Control Block (MKS-8036A Search Dial Module, Option)
    • Utility/Shotbox Control Block (MKS-8033 Utility/Shotbox Module, Option)
    • Downstream Key Control Block (MKS-8032 DSK Fader Module, Option)
  • Basic Menu Operations
    • Menu Organization
    • About the Top Menu List
    • Accessing Menus
    • Displaying a Menu
    • Interpreting the Menu Screen
    • Menu Operations
    • Switching Between the Main Menu Site and Subsidiary Menu Site
    • Shortcut Menu
• Chapter 3 Signal Selection and Transitions
  • Video Processing Flow
  • Signal Selection
    • Basics of Signal Selection
    • Bus Selection
    • Signal Assignment and Selection
    • Signal Name Display
  • Transitions
    • Selecting the Next Transition
    • Transition Types
  • Procedure for Basic Transition Operation
  • Key Priority Setting
    • Setting the Key Priority in the Transition Control Block
    • Setting the Key Priority by a Menu Operation
    • Display of the Key Output Status and Key Priority
  • Selecting the Transition Type by a Menu Operation
  • Super Mix Settings
  • Color Matte Settings
  • Executing a Transition
    • Transition Indicator Function
    • Setting the Transition Rate
    • Pattern Limit
    • Executing an Auto Transition
    • Executing a Transition With the Fader Lever (Manual Transition)
    • Combinations of Auto and Manual Transitions
    • Non-Sync State
    • Fader Lever Operation in Bus Fixed Mode
  • Transition Preview
  • Independent Key Transitions
    • Basic Independent Key Transition Operations
    • Setting the Independent Key Transition Type by a Menu Operation
    • Setting the Independent Key Transition Rate
• Chapter 4 Keys
  • Overview
    • Key Types
    • Key Modifiers
    • Key Memory
    • Key Default
  • Key Setting Operations Using Menus
    • Key Setting Menus
    • Key Type Setting
    • Chroma Key Composition
    • Chroma Key Adjustments
    • Selecting Key Fill and Key Source
    • Key Edge Modifications
    • Masks
    • Applying a DME Effect to a Key
    • Key Modify Clear
    • Blink Function
    • Video Processing
  • Key Setting Operations With the Cross-Point Control Block
    • Applying a DME Effect to a Key
  • Key Setting Operations With the Key Control Block
    • Operations in the Key Control Block
    • Key Edge Modifications
    • Masks
    • Applying a DME Effect to a Key
    • Other Key Setting Operations
  • Resizer
    • Two-Dimensional Transformations of Keys
    • Resizer Interpolation Settings
    • Resizer Crop/Border Settings
    • Applying Resizer Effects
  • Key Snapshots
    • Key Snapshot Operations
• Chapter 5 Wipes
  • Overview
  • Basic Procedure for Wipe Settings
    • Wipe Settings Menu
    • Wipe Pattern Selection
    • Setting Wipe Modifiers
    • Wipe Modify Clear
  • Wipe Settings for Independent Key Transitions
    • Basic Procedure for Independent Key Transition Wipe Settings
    • Setting Independent Key Transition Wipe Modifiers
  • Wipe Snapshots
    • Wipe Snapshot Operations With the Menus
• Chapter 6 DME Wipes
  • Overview
    • Types of DME Wipe Pattern
    • DME Wipe Pattern Variation and Modifiers
    • Relation Between DME Wipes and Other Effects
  • Basic Procedure for DME Wipe Settings
    • DME Wipe Settings Menu
    • DME Wipe Pattern Selection
    • Setting DME Wipe Modifiers
    • DME Wipe Modify Clear
  • DME Wipe Settings for Independent Key Transitions
    • Basic Procedure for Independent Key Transition DME Wipe Settings
    • Setting Independent Key Transition DME Wipe Modifiers
  • Resizer DME Wipe Setting
  • DME Wipe Snapshots
    • DME Snapshot Operations With the Menus
  • Creating User Programmable DME Patterns
    • User Programmable DME Transition Mode
• Chapter 7 Frame Memory
  • Overview
  • Still Image Operations
    • Preparations
    • Interpreting the Frame Memory Menu
    • Selecting an Input Image
    • Selecting Outputs and Target Frame Memory
    • Capturing and Saving an Input Image
    • Recalling Still Images
    • Image Processing
    • Image Output
    • Continuously Capturing Still Images (Record)
    • Recalling a Continuous Sequence of Still Images (Animation)
  • Frame Memory Clip Function
  • Frame Memory Clip Operations
    • Preparations for Operation
    • Recalling Clips
    • Clip Playback
    • Clip Creation
    • Creating and Handling Frame Memory Folders
    • Clip Output
    • Recording and Playback of Ancillary Data
  • Clip Transition Operations
  • Image Data Management
    • Pair File Processing
    • Moving Files
    • Deleting Files
    • Renaming Files
  • External Hard Disk Drive Access
    • Hard Disk Formatting
    • Saving Files
    • Recalling Files
• Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
  • Color Background
    • Color Background Settings Menu
    • Basic Color Background Setting Operations
  • Copy and Swap
  • Copy and Swap Operations
    • Copy and Swap Menu Operations
    • Copy by Button Operation
  • Misc Menu Operations
    • Port Settings for Control From an External Device
    • Editing Keyboard Settings
    • Safe Title Settings
    • Displaying a List of Transition Rates and Changing the Settings
  • AUX Menu Operations
    • AUX Bus Settings
  • Status Menu
  • Router Control Menu Operations
    • Checking the List of Inputs for Each Destination
    • Switching the Source for Each Destination
  • Video Process
    • Video Process Adjustments of a Primary Input Signal
    • Video Process Adjustments on a Particular Bus
    • Video Process Memory
  • Video Process Settings
• Chapter 9 Color Corrector
  • Preparations
  • Overall Color Corrector Operations
    • Enabling Color Corrector
    • Copy and Swap Operations
  • Color Corrector Functions
    • Input Video Processing Operations
    • Primary Color Correction Operations
    • Secondary Color Correction Operations
    • RGB Clip Operations
    • Luminance Processing Operations
    • Spot Color Adjustment
    • Output Video Processing Operations
    • YUV Clip Operations
• Chapter 10 Special Functions
  • Side Flags
    • Overview
    • Side Flag Settings
    • Wipe Action on Images With Side Flags
    • DME Wipe Action for an Image With Side Flags
  • Simple P/P Software
    • Overview
    • Restrictions on Use
    • Simple P/P Output Signal Selection on an M/E
• Appendix (Volume 1)
  • Wipe Pattern List
  • DME Wipe Pattern List
    • DME Wipe Patterns Available in One-Channel Mode
    • DME Wipe Patterns Available in Two-Channel Mode
  • Resizer DME Wipe Pattern List
  • Menu Tree
    • Recalling Menus
    • M/E-1 to M/E-3 Menus
    • PGM/PST Menu
    • Frame Memory Menu
    • Color Bkgd Menu
    • AUX/MON Menu
    • CCR Menu
    • Copy/Swap Menu
    • Misc Menu
    • Status Menu
    • DME Menu
    • Global Effect Menu
    • Device Menu
    • Macro Menu
    • Key Frame Menu
    • Effect Menu
    • Snapshot Menu
    • Shotbox Menu
    • File Menu
    • Engineering Setup Menu
    • Diagnostic Menu
• Chapter 11 DME Operations
  • DME
    • Three-Dimensional Transformations
    • Transformation Operation Modes
    • Graphics Display
    • Three-Dimensional Parameter Display
  • Three-Dimensional Transformation Operations
    • Basic Operations
    • Three-Dimensional Parameter Display
    • Entering Three-Dimensional Parameter Values
    • Graphics Display Operation
    • Canceling Virtual Images
  • DME Special Effect Operations
    • Special Effects
    • Operations Common to All DME Special Effects
    • Border Settings
    • Crop Settings
    • Beveled Edge Settings
    • Key Border Settings
    • Art Edge Settings
    • Flex Shadow Settings
    • Drop Shadow Settings
    • Wipe Crop Settings
    • Color Mix Settings
    • Defocus Settings
    • Blur Settings
    • Multi Move Settings
    • Sepia Settings
    • Mono Settings
    • Posterization and Solarization Settings
    • Nega Settings
    • Contrast Settings
    • Mosaic Settings
    • Sketch Settings
    • Metal Settings
    • Dim and Fade Settings
    • Glow Settings
    • Mask Settings
    • Freeze Settings
    • Nonlinear Effect Settings
    • Lighting Settings
    • Trail Settings
    • Motion Decay Settings
    • Keyframe Strobe Settings
    • Wind Settings
    • Spotlighting Settings
    • Background Settings
    • Separate Sides Settings
    • Shaped Video Settings
    • Invert Settings
    • Key Density Settings
    • Key Source Selection
    • Interpolation Settings
  • Global Effect Operations
    • Combiner Settings
    • Shadow Settings
• Chapter 12 External Devices
  • Control of External Devices
    • Shared Functions for External Device Control
  • Control of P-Bus Devices
    • Creating and Editing the P-Bus Timeline
    • P-Bus Trigger
  • Control of GPI Devices
    • GPI Timeline Creation and Editing
  • Control of VTRs, Extended VTRs, and Disk Recorders
    • Manual Operation
    • Controlling the Tape/Disk Transport
    • Checking VTR/Disk Recorder/Extended VTR Information
    • Cueup & Play
    • VTR/Disk Recorder/Extended VTR Timeline
    • Disk Recorder/Extended VTR File Operations
• Chapter 13 Keyframe Effects
  • Regions
  • Registers
  • Keyframes
    • Effects
    • Saving and Recalling Effects
    • Effect Attributes
    • Effect Editing
    • Time Settings
    • Paths
    • Effect Execution
    • Master Timelines
    • Sequence of Keyframe Operations
  • Displaying the Timeline Menu
    • Interpreting the Timeline Menu
    • Settings in the Timeline Menu
  • Recalling a Register
  • Specifying the Region and Edit Points
    • Selecting the Region in Which Editing Applies
    • Setting the Edit Points
  • Creating and Editing Keyframes
    • Creation
    • Insertion
    • Modification
    • Deletion
    • Movement
    • Copying
    • Pause
    • Keyframe Loop (Repeated Execution of a Specified Range)
    • Undoing an Edit Operation
    • Duration Mode Setting
    • Transition Mode Settings for User Programmable DME
  • Time Settings
    • Setting the Keyframe Duration
    • Setting the Effect Duration
    • Setting the Delay
  • Path Setting
    • Basic Procedure for Path Settings
  • Executing Effects
    • Executing Effects in the Keyframe Control Block
    • Setting the Run Mode
  • Saving Effects
  • Creating and Saving a Master Timeline
    • Creating and Saving a Master Timeline Using the Buttons in the Numeric Keypad Control Block
    • Creating and Saving a Master Timeline With the Menu
  • Register Operations in the Menus
    • Effect Attribute Settings
    • Effect Status Display
    • Effect Register Editing
    • Displaying a List of Effect Registers for Editing
• Chapter 14 Snapshots
  • Overview
    • Snapshot Types
    • Snapshot Attributes
  • Snapshot Operations From the Numeric Keypad Control Block
    • Saving and Recalling Snapshots
  • Snapshot Operations in the Menus
    • Selecting a Region or Reference Region in a Menu
    • Setting Snapshot Attributes
    • Snapshot Status Display
    • Setting Key Snapshot Attributes
    • Creating and Saving a Master Snapshot
    • Snapshot Register Editing
    • Displaying a List of Snapshot Registers for Editing
    • Operations in the Misc >Snapshot menu
• Chapter 15 Utility/Shotbox
  • Utility Execution
    • Executing a Utility With the User Preference Buttons (Menu Control Block)
    • Executing a Utility in the Utility/Shotbox Control Block (MKS-8033 Utility/Shotbox Module, Option)
  • Shotbox
  • Shotbox Register Creation
    • Creating a Shotbox Register in the Numeric Keypad Control Block
    • Creating a Shotbox Register Using the Menus
  • Shotbox Execution
    • Shotbox Execution From the Numeric Keypad Control Block
    • Shotbox Execution in the Utility/Shotbox Control Block (MKS-8033 Utility/Shotbox Module, Option)
  • Shotbox Register Editing
• Chapter 16 Macros
  • Macros
    • Overview
    • Macro Creation and Editing
    • Macro Execution
  • Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
    • Recalling a Macro Register and Executing a Macro
    • Creating and Editing a Macro
    • Saving a Macro
  • Macro Editing Using Menus
    • Macro Register Editing
    • Online Editing of Macro Events
    • Offline Editing of Macro Events
  • Macro Attachment Assigning
    • Setting and Canceling a Macro Attachment
    • Displaying the Macro Attachment List
    • Executing a Macro by Macro Attachment
  • Menu Macros
    • Recalling a Menu Macro Register and Executing a Menu Macro
    • Menu Macro Creation and Editing
    • Menu Macro Register Editing
  • Macro Timeline
    • Creating and Editing a Macro Timeline
• Chapter 17 Files
  • Overview of File Operations
  • Operations on Individual Files
    • Displaying the Individual File Operation Menus
    • Viewing Detailed File Information
    • Selecting Regions
    • Selecting a Device for Operations
    • Saving Files
    • Loading Files
    • Copying Files
    • Renaming Files
    • Deleting Files
  • File Batch Operations
    • Displaying the Batch Operation Menu
    • Batch Saving Files
    • Batch Loading Files
    • Batch Copying Files
  • Importing and Exporting Files
    • Displaying the Import/Export Menu
    • Importing Frame Memory Data
    • Exporting Frame Memory Data
  • Directory Operations
    • Displaying the Directory Menu
    • Creating a New Directory
    • Renaming a Directory
    • Deleting a Directory
  • Copying Files Between Different Unit IDs
  • Saving Files Recalled by Autoload
• Appendix (Volume 2)
  • SpotLighting
    • Texture Patterns
    • Shape Patterns
  • Functional Differences With Models of DME
  • Macro File Editing Rules
    • Macro File Syntax
    • Syntax of Event and Continue Statements
    • File Name
    • Saving and Recalling a File
    • Errors
    • Correspondence Between Events and Symbols
    • Symbols and Parameters
    • Example of File Contents
  • About the Macro Attachment List Display
    • M/E and PGM/PST Banks
    • Other Blocks
  • Menu Operations Not Recorded in a Menu Macro
• Chapter 18 System Setup (System)
  • Setup for the Whole System
  • Network Settings (Network Config Menu)
    • Making the Network Settings
  • System Settings (System Config Menu)
    • Specifying the Switcher Controlled by the Control Panel
    • Specifying the DME Connected to the Switcher
    • Enabling the FM Data Port of the Switcher
  • Setting the Signal Format (Format Menu)
    • Setting the Signal Format
    • Switching the Input Reference Signal for HD System
    • Setting Conversion Formats
  • Setting the Screen Aspect Ratio (Format Menu)
  • Selecting the State After Powering On (Start Up Menu)
    • Saving and Recalling Setup Data
    • Selecting the State at Start-up
    • Saving User-Defined Settings
    • Setting Automatic Loading of Register Data at Power On (Autoload Function)
  • Reset and Initialization (Initialize Menu)
  • Installation and Device Setup (Install/Unit Config Menu)
    • Installing Software
    • Making Settings Required to Use the Software
    • Adding User Texture Patterns
    • Saving a Frame Memory Clip With Ancillary Data
  • System Maintenance (Maintenance Menu)
    • Setting the Date and Time
    • Using a Memory Card
    • Carrying Out the Primary Setting
    • Reloading a USB Driver
    • Initializing the Hard Disk
    • Locking the Setup Menu Settings
• Chapter 19 Control Panel Setup (Panel)
  • Overall Control Panel Settings (Config Menu)
    • Panel Setup
    • Interchanging the Bank Order or Disabling Operation
    • Assigning Two M/E Banks to One M/E Bank
    • Assigning the Key Delegation in the Downstream Key Control Block (MKS-8032 DSK Fader Module, Option)
    • Linking Switcher Bus and Router Destination
    • Linking Transitions Between Keyers
    • Linking the Next Transition Selection Buttons
    • Selecting the Module to be the Reference for Device Control Block
    • Assigning a Region to a Region Selection Button in the Numeric Keypad Control Block
    • Setting the Assignment of Transition Type Selection Buttons
    • Setting VTR Operation Button Assignment
    • Setting the Assignment of Macro Operation Buttons
    • Assigning Keys to the DSK1 and DSK2 Buttons in the Downstream Key/Fade-to-Black Control Block
    • Assigning Keys to the Independent Key Transition Control Block (Simple Type)
    • Assigning Preview Output to Preview Selection Buttons
    • Assigning Functions to the Device Control Block
    • Inhibiting Utility Bus and Key Operations
    • Assigning Functions to the Menu Control Block Top Menu and User Preference Buttons
  • Cross-Point Settings (Xpt Assign Menu)
    • Creating Cross-Point Assign Tables
    • Copying Cross-Point Assign Tables
    • Selecting Cross-Point Assign Tables
    • Exporting Source Names and Destination Names
    • Making Settings for Audio Mixer
    • Assigning a Cross-Point Button to Enable/Disable Side Flags
  • Auxiliary Bus Control Block Settings (Aux Assign Menu)
    • Assigning a Bus to an AUX Delegation Button
    • Using the Auxiliary Bus Control Block for Router Control
  • Setting Button Assignments (Prefs/Utility Menu)
    • Assigning Functions to User Preference Buttons
    • Assigning a Function to a Memory Recall Button in the Utility/Shotbox Control Block (MKS-8033 Utility/Shotbox Module, Option)
  • Interfacing With External Devices (Device Interface Menu)
    • Making Control Panel GPI Input Settings
    • Making Control Panel GPI Output Settings
    • Setting the Control Mode for P-Bus Devices
    • Setting the SCU Editor Panel Port
    • Making DCU Serial Port Settings
    • Sharing Disk Recorder/Extended VTR File Lists
  • Operation Settings (Operation Menu)
    • Setting the On-Air Tally
    • Setting the Transition Rate Display Mode
    • Making Settings Relating to Effects
    • Setting the First Keyframe When a Rewind is Executed
    • Setting the Source and Destination Names
    • Settings for the Wipe Snapshot Menu
    • Setting the Button Operation Mode
    • Setting Trackball, Joystick, Search Dial, and Double- Click Sensitivity
    • Specifying Main Split Fader
    • Setting the Macro Execution Mode
  • Screen Saver and Other Settings (Maintenance Menu)
    • Screen Saver Settings
    • Adjusting the Brightness
    • Adjusting the Alarms
    • Calibrating the Touch Panel
    • Setting the Menu to be Shown When the Menus Are Started
    • Selecting the Mouse Button Used for Adjusting the Knob Parameters
• Chapter 20 Switcher Setup (Switcher)
  • Settings for Switcher Configuration (Config Menu)
    • Adjusting the Reference Phase
    • Specifying the Video Switching Timing
    • Setting the Operation Mode
    • Setting User Regions
    • Assigning PGM/PST Logically to an M/E
    • Setting the Assignments of DME Channels to Use on the Individual M/E Banks
    • Setting the Side Flag Video Material and Operation
  • Signal Input Settings (Input Menu)
    • Making Phase Adjustment and Through Mode Settings
    • Making Video Process Settings
    • Enabling the Illegal Color Limiter
    • Setting the Format Converter Inputs
  • Signal Output Settings (Output Menu)
    • Assigning Output Signals
    • Setting the Output Signal
  • Settings Relating to Video Switching (Transition Menu)
    • Selecting the Bank to Make the Settings
  • Settings Relating to Keys, Wipes, Frame Memory and Color Correction (Key/Wipe/FM/CCR Menu)
    • Switching Video Process Memory On or Off
    • Settings for the Show Key Function
    • Settings for Key Auto Drop Function
    • Automatically Naming and Saving to Frame Memory
    • Selecting the Bank to Make the Settings
  • Settings Relating to Function Links (Link Menu)
    • Setting a Cross-Point Button Link
    • Making Link Table Settings
    • Linking Cross-Point Buttons and GPI Output Ports
    • Making a Setting for Linking Two M/E Banks
    • Making a Link Setting for Key Transition
  • Interfacing With External Devices (Device Interface Menu)
    • Making 9-Pin Port Device Interface Settings
    • Making Switcher Processor GPI Input Settings
    • Making Switcher Processor GPI Output Settings
    • Enabling or Disabling AUX Bus Control
    • Setting the Interface Between the DME and the Switcher
    • Selecting the Mode for Turning Off Keys Upon Receiving the Editor Command
• Chapter 21 DME Setup (DME)
  • Settings Relating to Signal Inputs (Input Menu)
    • Setting the Initial Crop
    • Setting an Illegal Color Limit for Matte Signals
    • Making DME System Phase Adjustment
    • Setting the TBC Window Center Position
  • Settings Relating to Signal Outputs (Output Menu)
    • Adjusting the Monitor Output
    • Setting the Monitor Output
  • Interfacing With External Devices (Device Interface Menu)
    • Making DME GPI Input Settings
    • Making DME GPI Output Settings
• Chapter 22 DCU Setup (DCU)
  • Setup Relating to DCU
  • Settings Relating to Parallel Inputs (Input Config Menu)
    • Assigning a GPI Input Port
    • Releasing the Assignment of a GPI Input Port
  • GPI Input Setting (GPI Input Assign Menu)
    • Making DCU GPI Input Settings
  • Parallel Output Settings (Output Config Menu)
    • Assigning a GPI Output Port
    • Releasing the Assignment of a GPI Output Port
  • GPI Output Setting (GPI Output Assign Menu)
    • Making DCU GPI Output Settings
  • Serial Port Settings (Serial Port Assign Menu)
    • Making Serial Port Settings
    • Making Detailed Settings on the External Device Connected to the Serial Port
• Chapter 23 Setup Relating to Router Interface and Tally (Router/Tally)
  • Router Interface Settings (Router Menu)
    • Assigning Switcher Inputs and Outputs to S-Bus Space
    • Making an External Box Setting
  • Tally Group Settings (Group Tally Menu)
  • Wiring Settings (Wiring Menu)
    • Making New Wiring Settings
    • Changing the Wiring Settings
    • Deleting Wiring Settings
    • Sorting Wiring Settings
  • Tally Generation Settings (Tally Enable Menu)
    • Making New Tally Generation Settings
    • Modifying Tally Generation
    • Deleting Tally Generation Settings
  • Tally Copy Settings (Tally Copy Menu)
    • Making New Tally Copy Settings
    • Modifying Tally Copy Settings
    • Deleting Tally Copy Settings
  • Parallel Tally Settings (Parallel Tally Menu)
    • Making or Modifying Parallel Tally Settings
    • Deleting Parallel Tally Settings
  • Serial Tally Settings (Serial Tally Menu)
    • Setting or Changing the Serial Tally Settings
    • Making the Serial Tally Source Address Settings
    • Clearing a Source Address Setting
• Chapter 24 Simple Connection of the MKS-8080/8082 AUX Bus Remote Panel
  • Procedure for Simple Connection
  • Setting Status of the MKS-8080/8082 in Simple Connection
• Chapter 25 DIAGNOSIS
  • Checking the Communications Status
    • Communications Status Display
• Appendix (Volume 3)
  • Data Saved by [Setup Define] and [Initial Status Define]
    • Data Saved by [Setup Define]
    • Data Saved by [Initial Status Define]
  • Error Messages
    • Error Messages Displayed in the Error Status/Error Log Menu
    • Error Messages Appearing in a Message Box
    • Error Messages Shown in the Error Information Menu
• Index