Epson Home Cinema 2350 2800-Lumen Pixel-Shift 4K UHD 3LCD Smart Gaming Projector - Manual (Page 112)

112
Status light Lamp light Temp light Status and solution
Off Off Orange Projector has overheated and turned off;
leave it turned off to cool down for about five
minutes, then do the following:
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects
• Clean or replace the air filter
• Make sure the environmental temperature
is not too hot
• If operating the projector at high altitude,
turn on High Altitude Mode
• If the problem persists, unplug the
projector and contact Epson for help
Off Orange Off Lamp or lamp cover has a problem
• Check to see if the lamp is burned out,
broken, or installed incorrectly; reseat or
replace the lamp as necessary
• Clean the air filter
• If operating the projector at high altitude,
turn on High Altitude Mode
• Check that the lamp cover is installed
correctly
• If the problem persists, unplug the
projector and contact Epson for help
Varies Flashing
orange Off Replace the lamp soon to avoid damage; do
not continue using the projector
Off Orange Orange Internal projector error; turn the projector off,
unplug it, and contact Epson for help
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.