Epson Home Cinema 2350 2800-Lumen Pixel-Shift 4K UHD 3LCD Smart Gaming Projector - Manual (Page 137)

137
• Do not disassemble the lamp or subject it to impacts.
• Do not place the source of an open flame, such as a lit candle, on or near the projector.
• During projection, do not block the light from the projector with a book or other objects. If the light from
the projector is blocked, the area on which the light shines becomes hot which could cause it to melt,
burn, or start a fire. Also, the lens may get hot due to the reflected light which could cause the
projector to malfunction. To stop projection, use the A/V Mute function, or turn off the projector.
• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or
pull it excessively. Keep the power cord away from hot electrical appliances. Do not tie the power cord
to other cables. Do not use the power cord if it is damaged. Fire or electric shock may result. Contact
your dealer if the cable becomes damaged.
• If the lamp breaks, ventilate the area immediately, and contact a doctor if any fragments of broken
glass are inhaled or get into the eyes or mouth
• Always lower the volume before turning off the projector. Turning on the projector with the volume too
high can damage your ears. Gradually increase the volume after turning on the projector.
• When a still image is displayed for a long time, image retention may occur on the screen. Do not
display images in the exact same position for long periods.
• Always attach the lens cover to the lens when not using the projector to prevent the lens from
becoming dirty or damaged.
• Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in
fire, injury, or corrosion. When replacing batteries, take the following precautions: insert batteries so
that the polarities (+ and -) are correct; do not use batteries of different types or mix old and new
batteries; do not use any batteries other than those specified in this manual; if batteries leak, wipe
away battery fluid with a soft cloth and replace them with new batteries; if battery fluid gets on your
hands, wash them immediately; replace the batteries as soon as they run out; remove the batteries if
you will not be using the projector for a long period of time; do not expose batteries to heat or flame
and do not put them in water; dispose of used batteries according to local regulations; keep batteries
out of the reach of children. Batteries are choking hazards and are very dangerous if swallowed. If a
battery is swallowed, seek medical attention immediately.
• Remove the batteries from the remote control before storing the projector. If the batteries are left in the
remote control for long periods, they may leak.
• Do not disassemble the projector when disposing of it. Dispose of the projector according to your local
or national laws and regulations.
• Do not beam any lasers into the projector. If a high-powered laser is beamed through the surface of
the projection lens, it can cause a malfunction. Use non-permeable and incombustible metal plates,
such as aluminum or iron, to block lasers and protect the projection lens, if needed.