Epson Home Cinema 2350 2800-Lumen Pixel-Shift 4K UHD 3LCD Smart Gaming Projector - Manual (Page 134)

134
• Do not install the projector in locations exposed to high humidity and dust, such as on a kitchen
counter, in the kitchen, or near a humidifier, or in locations exposed to oil smoke or steam. Doing so
could cause fire or electric shock.
• Do not use the projector near water, sources of heat, high-voltage electrical wires, or sources of
magnetic fields. These may interfere with correct operation.
• Do not use a power source with a voltage other than those specified in this manual.
• Use the type of power source indicated on the projector. Use of a different power source may result in
fire or electric shock. If you are not sure of the power available, consult your dealer or power company.
• Place the projector near a wall outlet where the plug can be easily unplugged.
• Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not
insert the plug into a dusty outlet. Insert the plug firmly into the outlet. Do not pull the power cord when
disconnecting the plug; always be sure to hold the plug when disconnecting it. Do not overload wall
outlets, extension cords, or power strips. Do not modify the plug. Failure to comply with these
precautions could result in fire or electric shock.
• Do not place the projector where the cord can be walked on. This may result in fraying or damage to
the plug.
• Unplug the projector from the wall outlet and allow to cool before cleaning. This avoids electric shock
during cleaning. Use a dry cloth (or, for stubborn dirt or stains, a moist cloth that has been wrung dry)
for cleaning. Do not use liquid or aerosol cleaners, any sprays containing flammable gas, or solvents
such as alcohol, paint thinner, or benzine. Water infiltration or deterioration and breakage of the
projector housing could result in electric shock.
• Do not block the slots and openings in the projector case. They provide ventilation and prevent the
projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it
on top of loose papers. Do not cover the projector with a blanket, curtain, or tablecloth. If you are
setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and
the projector. On the side where hot air is exhausted from the projector, leave at least 11.8 inches (30
cm) of space between the wall and the projector.
• Do not operate the projector in a closed-in cabinet or airtight location unless proper ventilation is
provided. If the location is not sufficiently ventilated, hot exhaust from the projector will accumulate
and could trigger the projector's built-in protection circuits, and the projector may malfunction.
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially
flammable objects, near the projector. Do not place any containers of liquid or chemicals on top of the
unit. Never spill liquid of any kind into the projector. Fire or electric shock may result.
• Do not insert or drop metal, flammable, or foreign objects into the projector's vents or openings nor
leave them nearby. Doing so may result in fire, electric shock, or burns.