Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) - Manual (Page 102)

Serato DJ Lite
102
En
 Using an effect
The following explains how to operate the slot 1 effect for FX1 on the
Serato DJ Lite screen.
1 Display the [FX] panel on the Serato DJ Lite screen.
2 Press the [FX SELECT] button.
The effect changes each time you press the button.
3 Slide the [FX CH SELECT] switch.
– [1] : Applies the effect to the sound of channel 1.
– [2] : Applies the effect to the sound of channel 2.
– [1&2] : Applies the effect to the sound of channel 1 and channel 2.
4 Press the [BEAT  ] button or [BEAT  ] button.
Set the number of beats synchronized to the effect sound.
5 Turn the [FX LEVEL/DEPTH] knob to adjust the parameter of the
effect.
The parameter on slot 1 of FX1 on the Serato DJ Lite screen is applied.
6 Press the [FX ON/OFF] button.
The effect is applied to the sound of the channel you set in step 3.