Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) - Manual (Page 138)

rekordbox for iOS/Android
138
En
* The echo effect isn’t applied when the crossfader is moved to the
right starting from the left edge.
• You can select the fader to control Smart Fader in [Settings] >
[DDJ-FLX4 settings] > [Fader Used with SMART FADER] in
rekordbox for iOS/Android.
 Canceling Smart Fader
Press the [SMART FADER] button.
Smart Fader turns off.
Using a microphone
When connecting your mobile device to the unit with a USB cable, the
microphone sound outputs from the
[MASTER] output terminal or
headphones output terminal of the unit.
• For microphone sound, there are [Effect Mode] which applies an
effect to the sound and [Low Latency Mode] which doesn't apply an
effect to the sound. Set [Settings] > [DDJ-FLX4 settings] >
[Microphone Input] to [Effect Mode] (default) or [Low Latency
Mode] .
 Read: [Microphone Input] setting (page 141)
• When connecting your mobile device to the unit via Bluetooth, the
microphone sound doesn't output from the
[MASTER] output
terminal or headphones output terminal of the unit.
 Using Effect Mode
1 Connect a microphone to the [MIC] input terminal.
2 Tap the button on the rekordbox for iOS/Android screen to
display the MIC panel, then tap .
3 Turn the [MIC LEVEL] knob.