Changing the settings, Launching utilities mode – Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) User Manual
Page 144
144
En
Changing the settings
Launching Utilities mode
Be sure to close your DJ application and then launch Utilities mode.
To use Utilities mode when connected to rekordbox for Mac/Windows
or rekordbox for iOS/Android, set it on the preferences screen in
rekordbox for Mac/Windows or rekordbox for iOS/Android.
Read: Changing the settings in rekordbox for Mac/Windows
Read: Changing the settings in rekordbox for iOS/Android
(page 140)
(To use Demo mode, set it on the unit.)
1 Disconnect the USB cable.
2 Hold both the
[SHIFT]
and
[PLAY/PAUSE
]
buttons on the left
deck and connect the USB cable.
Utilities mode launches.
3 Change the settings.
When you change the settings, they will be saved. While saving, the bottom
row of Performance Pads on the left deck flashes. If you disconnect the USB
cable while the pads are flashing, settings may not be saved.
4 Disconnect the USB cable to turn off the unit.
Utilities mode turns off.