Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) - Manual (Page 68)

rekordbox for Mac/Windows
68
En
Analyzing tracks
Track analysis starts when you drag and drop a music file, or a folder
containing music files, into the Track List in rekordbox for Mac/
Windows.
• If a track is loaded to a deck before analysis is complete, it may take
some time to display its BPM and waveform.
• Depending on the number of tracks, analysis may take some time.
Using Beat FX
You can apply effects that match the tempo (BPM) of the track loaded
on the deck.
1 Click in the top-left of the rekordbox for Mac/Windows screen
to display the FX panel, and click to choose settings for Multi
mode.
2 Press the [BEAT FX SELECT] button on the unit.
The selected Beat FX changes each time you press the button:.
If you press the
[BEAT FX SELECT] button while holding the [SHIFT] button,
the selected Beat FX changes in the reverse order.
3 Slide the [BEAT FX CH SELECT] switch.
The channel that Beat FX will be applied to changes each time you slide the
switch.
–
[1] : Applies Beat FX to the sound of channel 1.
– [2] : Applies Beat FX to the sound of channel 2.
– [1&2] : Applies Beat FX to the sound of channel 1 and channel 2.
For [1&2] , the beat, effect type, etc. are synchronized between the unit 1 and
unit 2 of Beat FX. The beat settings may not be synchronized due to
differences in the BPM of the tracks loaded on the decks. Also, the
synchronization doesn't work when the effect is set to Single mode.