Rekordbox for mac/windows, Using a microphone – Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) User Manual
Page 75

rekordbox for Mac/Windows
75
En
•
If
[Microphone Input]
in rekordbox for Mac/Windows is set to
[Low Latency
Mode]
, the sound from the
[MIC]
input terminal of the unit can't be recorded.
To record the sound from the
[MIC]
input terminal, set
[Microphone Input]
in rekordbox for Mac/Windows to
[Effect Mode]
.
Using a microphone
1 Connect a microphone to the
[MIC]
input terminal.
2 Click the
button at the top-right of the rekordbox for Mac/
Windows screen to display the mixer panel, then click
so it
lights up.
•
To output the microphone sound from the unit via a PC/Mac, you'll need to
do this. To output the microphone sound from the unit another away, skip this
step.
3 Turn the
[MIC LEVEL]
knob.
Adjust the volume of the sound output from the
[MIC]
input terminal.
•
The sound comes out at a high volume if the knob is turned all the way to the
right.
4 Input audio to the microphone.
When outputting microphone sound from the unit via a PC/Mac, you can use
the microphone EQ, microphone effect, TALKOVER, FEEDBACK REDUCER,
etc.
•
To output the microphone sound from this unit via a PC/Mac, set
[Microphone Input]
to
[Effect Mode]
.
Read: [Microphone Input] setting (page 78)
•
If
[Microphone Input]
is set to
[Low Latency Mode]
in rekordbox for Mac/
Windows, the microphone sound outputs from the unit another way.