Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) - Manual (Page 78)

rekordbox for Mac/Windows
78
En
[CROSSFADER] > [Cut Lag] setting
Adjust the Cut Lag on both edges of the crossfader.
Units of 0.1 mm can be adjusted from 0.3 mm to 5.5 mm.
• The default Cut Lag is 1.0 mm.
• This Cut Lag setting is a guide, and may not be exact.
[Level Meter] setting
Select the channel level meter or master level meter to show on the
level meter in the mixer section.
The default setting is
[Channel Level] .
• [Channel Level] : Channel level meter
• [Master Level] : Master level meter
[Microphone Input] setting
• [Effect Mode] : Microphone sound can be output from the unit via a
PC/Mac. You can apply effects such as the microphone FX in
rekordbox for Mac/Windows to the microphone sound.
• [Low Latency Mode] : Microphone sound can be output from the unit
another way (i.e. not a PC/Mac). You can't apply effects such as the
microphone FX in rekordbox for Mac/Windows to the microphone
sound, but the time lag due to the transmission delay (latency) of the
sound data can be reduced compared to Effect mode.