Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) - Manual (Page 133)

rekordbox for iOS/Android
133
En
4 Press the [BEAT FX ON/OFF] button.
The Beat FX is applied to the sound of the channel you set in step 2.
You can adjust the parameter of Beat FX by turning the
[BEAT FX LEVEL/
DEPTH] knob.
When Beat FX is turned on, the button flashes.
• Press the [BEAT FX ON/OFF] button again to turn off Beat FX.
5 Press the [BEAT FX ON/OFF] button and release it while holding
the [SHIFT] button.
Beat FX is turned off, and Release FX is applied.
 Switching Beat FX Tempo mode
To set the tempo for Beat FX, there are 2 modes you can use: BPM
Auto mode and BPM Tap mode.
• The default setting is BPM Auto mode.
BPM Auto mode
The track’s BPM is used as the base for the effect’s tempo.
BPM Tap mode
The BPM used as the base for Beat FX is set to match the tempo at
which you tap the
[BEAT  ] button while holding the [SHIFT] button.
Setting to BPM Auto mode/BPM Tap mode
Press the [BEAT  ] button while holding the [SHIFT] button to set to
BPM Tap mode.
Press the
[BEAT  ] button while holding the [SHIFT] button to set to
BPM Auto mode.