Pioneer Dj DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller (Graphite) - Manual (Page 140)

rekordbox for iOS/Android
140
En
Changing the settings in rekordbox for iOS/
Android
You can change the settings of the unit in rekordbox for iOS/Android
under
[DDJ-FLX4 Settings] in [Settings] .
When you connect the unit to rekordbox for iOS/Android, you can
change the following settings:
[BACK SPIN LENGTH] setting
When using the Back Spin feature with the jog wheel, the length of the
Back Spin is different from the length of the jog wheel rotation.
You can choose the length of the Back Spin from 3 options: short,
normal, or long.
• [short] : Back Spin length short
• [normal] : Back Spin length normal
• [long] : Back Spin length long
[Fader Start] setting
Change the setting of the Fader Start function.
[CROSSFADER] > [REVERSE] setting
Assign the decks to different sides of the crossfader.
• ON: The left side of the crossfader is assigned to [DECK2] and the
right side is [DECK1] .
• OFF: The left side of the crossfader is assigned to [DECK1] and the
right side is [DECK2] .
[CROSSFADER] > [Cut Lag] setting
Adjust the Cut Lag on both edges of the crossfader.
Units of 0.1 mm can be adjusted from 0.3 mm to 5.5 mm.
• The default Cut Lag is 1.0 mm.
• This Cut Lag setting is a guide, and may not be exact.