HP SmTank 5101 All-In-One Wireless Thermal Inkjet Color Printer - Manual (Page 14)

USB-only models
Table 1-6 Common tasks on the printer control panel
Task Instructions
Enter printer support mode
NOTE: For some printer tasks, the printer needs to
be placed in the support mode.
Press and hold the Resume button for 3 seconds.
All button lights on the printer control panel will light up.
Exit printer support mode
Press the Cancel button once, do not hold the button.
All button lights will turn off if there are no printer errors.
Switch between the Photo Copy mode and the
Document Copy mode
1. Press and hold the Resume button for 3 seconds
until the control panel buttons light up.
2. Press and hold both Copy buttons at the same time for 3
seconds.
Wi-Fi models
Table 1-7 Common tasks on the printer control panel
Task Instructions
Enter printer support mode
NOTE: For some printer tasks, the printer needs to be
placed in the support mode.
Press and hold the Information button for at least 5 seconds.
All button lights on the printer control panel will light up.
Exit printer support mode
Press the Cancel button once, do not hold the button.
All button lights will turn off if there are no printer errors.
Switch between the Photo Copy mode and the Document
Copy mode
1. Press and hold the Information button for 5 seconds until
the control panel buttons light up.
2. Press and hold both Copy buttons at the same time for 3 seconds.
Turn on or off the wireless capability of the printer When the wireless capability is turned on, the Wi-Fi button lights up.
● If the blue Wi-Fi light is off, press the Wi-Fi button to turn it
on.
● To turn off the Wi-Fi function, press the button again.
Enter Wi-Fi Protected Setup (WPS) Push Button mode
Press and hold the Wi-Fi button for at least 3 seconds.
8 Chapter 1 Get started