HP SmTank 5101 All-In-One Wireless Thermal Inkjet Color Printer - Manual (Page 43)

2. In the HP Printer Assistant, select Print tab.
3. Select Printer Home Page (EWS).
Configure IP network settings
Use the following sections to configure the printer network settings.
If prompted for a password, enter the PIN available from a label on the printer. See Find the default printer
password or PIN .
View or change network settings
View or change IP configuration settings.
1. Open EWS.
2. Click the Network tab to obtain network information. Change settings as needed.
Rename the printer on a network
Rename the printer on a network so that it can be uniquely identified.
1. Open EWS.
2. Click the Network tab.
3. From the left menu, click General.
4. Click Network Identification.
5. Make the necessary changes, and then click Apply.
Manually configure IPv4 TCP/IP parameters
Manually set an IPv4 address, subnet mask, and default gateway.
1. Open EWS.
2. Click the Network tab.
3. From the left menu, click the wireless option.
4. Click IPv4 Configuration.
5. Make the necessary changes, and then Apply.
Assign or change the system password
Assign an administrator password for access to the printer and EWS so that unauthorized users cannot change
the printer settings.
1. Open EWS.
2. Click the Settings tab.
3. From the left menu, click Security.
Configure IP network settings 37