HP SmTank 5101 All-In-One Wireless Thermal Inkjet Color Printer - Manual (Page 59)

Table 8-1 Wi-Fi status, light, and icons (continued)
Wi-Fi light Wi-Fi icons Wi-Fi status
Blinks Wi-Fi signal bars cycle.
The printer is in Wi-Fi setup mode or is trying to connect to a Wi-Fi
network.
● A blinking Wi-Fi light indicates that the printer is not connected
to a network or is trying to connect.
● During printer setup, a blinking Wi-Fi light also indicates that
the printer is in Wi-Fi setup mode.
In setup mode, the Wi-Fi light blinks blue, the Wi-Fi
signal bars cycle, and the Wi-Fi alert is off. If the setup mode
times out after some time, you can restart it by restoring the
printer network settings.
See Restore original factory defaults and settings .
Blinks ● Wi-Fi dot and bottom bar
are on.
● Wi-Fi alert blinks.
A Wi-Fi error could have occurred.
Blinks Wi-Fi icon blinks.
The printer is in WPS mode.
Fast blinks
● Wi-Fi dot is on.
● Wi-Fi alert and signal
bars fast blink.
An error has occurred in WPS mode.
Jams and paper-feed issues
Look inside all paper paths and remove any jammed paper or foreign objects found.
Possible jam locations
Paper jams can occur in the following areas of the printer.
Jams and paper-feed issues 53