IOGear 2-Port 4K Dual View DisplayPort Matrix KVMP Switch - Manual (Page 15)

15
For Hotkey Port Selection:
All port switching begins by clicking [Scroll Lock] twice. Details
of the Hotkey parameters, see Hotkey Operation, page 18
For Mouse Wheel Switching:
Double-click the scroll wheel of your USB mouse to cycle
through the ports
Notes:
• Mouse switching is only supported by USB 3-key scroll wheel mice
• Mouse switching is disabled by default. See Hotkey Setting Mode
(HSM) on page 25, to enable mouse switching
• Mouse switching is only supported when Mouse Emulation is
enabled
For Mouse Crossover Switching:
Mouse Crossover Switching allows the mouse cursor to
drag across two monitors for instant switching between two
connected computers
Notes:
• Before using Mouse Crossover Switching, mouse acceleration in
the operating system settings must be turned OFF
• To enable Mouse Crossover Switching, please see page 26
• Mouse emulation must be enabled for Mouse Crossover Switching to function
Operation Mode Switching
The GCMS1922 provides two operation modes – Extension
Mode(default) and Matrix Mode. There are three methods to
switch between Extension Mode and Matrix Mode.
• Push Button - involves pressing the Mode selection
pushbutton located on GCMS1922 front panel. (See
page 9-10)
• Hotkey - involves entering a hotkey combination from the keyboard (see page 26
under Hotkey Operation section for details).
• Remote Port Selector - involves pressing port selection pushbutton located on the
remote port selector, Press, and hold the remote port selector pushbutton for more
than 3 seconds to switch between the two modes. (See page 14)