IOGear 2-Port 4K Dual View DisplayPort Matrix KVMP Switch - Manual (Page 17)

17
Port ID Numbering
Each KVM port section on the GCMS1922 is assigned a port number
• 1 or 2 for the GCMS1922
• The port numbers are marked on the rear panel of GCMS1922
• The Port ID of a computer is derived from the KVM port number it is connected to. For
example, a computer connected to KVM port 2 has a Port ID of 2.
• The Port ID is used to specify which computer gets the KVM, USB peripheral and
audio focus with the Hotkey port selection method (see Hotkey Operation page 18
for details) .
Alternative Manual Port Selection Setting
When Hotkey Setting Mode has been activated, pressing [S] will invoke the alternative front
panel pushbutton manual port selection functions as follows:
• Press a port selection pushbutton once to bring only the KVM focus to the computer
attached to its corresponding port.
• Press and hold a port selection pushbutton for more than 2 seconds to bring the KVM,
audio and USB focus to the computer attached to its corresponding port.
• Press a port selection pushbutton twice to bring only the audio focus to the computer
attached to its corresponding port.
• Press and hold selection pushbuttons 1 and 2 for more than 2 seconds to start Auto
Scan Mode (see Auto Scan Mode at page 21 for details)