IOGear 2-Port 4K Dual View DisplayPort Matrix KVMP Switch - Manual (Page 24)

24
USB Reset
If the USB loses focus and needs to be reset:
1. Invoke HSM, see page 22
2. Press and release [F5]
Keyboard Language
To change the keyboard language:
1. Invoke HSM, see page 22
2. Press [F6] [nn] [Enter]
Note: [nn] is a two-digit number that represents the keyboard language code
• US English: 33
• French: 08
• German: 09
• Japanese: 15
Beeper Setting
The Beeper can be hotkey toggled ON and OFF. To toggle the Beeper:
1. Invoke HSM, see page 22
2. Press and release [B]
The Beeper toggles ON or OFF
Port Switching Keys
To disable the Port Switching Keys ( [Scroll Lock][Scroll Lock] ) or ( [Ctrl][Ctrl] ):
1. Invoke HSM, see page 22
2. Press [X] [Enter]
Note: This procedure is a toggle. To enable the Port Switching keys, repeat Step 1 and 2
Firmware Upgrade Mode
To set the GCMS1922 to Firmware Upgrade Mode:
1. Invoke HSM, see page 22
2. Key in [u][p][g][r][a][d][e]
3. Press [Enter]
The front panel LEDs will flash to indicate the Upgrade has started
Note: To exit Firmware Upgrade Mode, you must power OFF the GCMS1922