Optoma ZU725T 7800-Lumen WUXGA Laser DLP Projector - Manual (Page 42)

English 42
USING THE PROJECTOR
Image menu
Learn how to configure image settings.
Submenus
‡ Picture Mode
‡ Dynamic Range
‡ Brightness
‡ Contrast
‡ Sharpness
‡ Gamma
‡ Dynamic Contrast
‡ Color Settings
‡ Wall Color
‡ 3D Setup
Picture Mode
There are many factory presets optimized for various types of images.
Presentation
This mode is suitable for showing in front of public in connection to the PC.
Bright
Maximum brightness from PC input.
Cinema
Provides the best colors for watching movies.
HDR
Decodes and displays High Dynamic Range (HDR) content for the deepest blacks, brightest whites, and vivid
cinematic color using REC.2020 color gamut. This mode will be automatically enabled if HDR is set to Auto
(and HDR Content is sent to projector – 4K UHD Blu-ray, 1080p/4K UHD HDR Games, 4K UHD Streaming
Video). While HDR mode is active, other display modes (Cinema, Reference, etc.) cannot be selected as HDR
delivers color that is highly accurate, exceeding the color performance of the other display modes.
sRGB
Standardized accurate color.
DICOM SIM.
This mode can project a monochrome medical image such as an X ray radiography, MRI, etc.
Blending
When using multiple projectors, this mode can eliminate the visible banding and create a single bright, high
resolution image across the screen.
3D
To experience the 3D effect, you need to have 3D glasses, make sure your PC/portable device has a 120 Hz
signal output quad buffered graphics card and have a 3D Player installed.
2D High Speed
Displays the status of 2D High Speed mode.
User
Memorize user’s settings.