Optoma ZU725T 7800-Lumen WUXGA Laser DLP Projector - Manual (Page 48)

English 48
USING THE PROJECTOR
WUXGA Auto Mapping Rule
Auto
Input resolution Auto/Scale
H-resolution V-resolution 1280 800
4:3
640 480 1600 1200
800 600 1600 1200
1024 768 1600 1200
1280 1024 1600 1200
1400 1050 1600 1200
1600 1200 1600 1200
Wide Laptop
1280 720 1920 1080
1280 768 1920 1152
1280 800 1920 1200
SDTV
720 576 1350 1080
720 480 1620 1080
HDTV
1280 720 1920 1080
1920 1080 1920 1080
Digital Zoom
Digital adjust the size of the projected image.
Proportional
Enable the function to have the image’s height and width changed at the same ratio.
Horizontal
Use the  and  buttons to change the width of the projected image.
Vertical
Use the p and q buttons to change the height of the projected image.
Horizontal Shift
Use the  and  buttons to adjust the horizontal shift the image.
Vertical Shift
Use the p and q buttons to adjust the vertical shift the image.
Reset
Reset digital zoom settings to factory default values.
Note: When 3D or 2D High Speed mode is selected, the Digital Zoom will be unavailable.
Image Shift
Adjust the projected image position.
H. Position
Use the  and  buttons to adjust the projected image position horizontally.
V. Position
Use the p and q buttons to adjust the projected image position vertically.
Reset
Reset image shift settings to factory default values.
Note: When 3D or 2D High Speed mode is selected, the Image Shift will be unavailable.