vMix Live Production Software Pro - Manual (Page 189)

vMix User Guide
189 / 208
SetBalance Value = Balance -1-1 Value,Input
SetBusAVolume Value = Volume 0-100 Value
SetBusBVolume Value = Volume 0-100 Value
SetBusCVolume Value = Volume 0-100 Value
SetBusDVolume Value = Volume 0-100 Value
SetBusEVolume Value = Volume 0-100 Value
SetBusFVolume Value = Volume 0-100 Value
SetBusGVolume Value = Volume 0-100 Value
SetGain Value = Gain dB 0-24 Value,Input
SetGainChannel1 Value = Gain dB 0-24 Value,Input
SetGainChannel2 Value = Gain dB 0-24 Value,Input
SetHeadphonesVolume Value = Volume 0-100 Value
SetMasterVolume Value = Volume 0-100 Value
SetVolume Value = Volume 0-100 Value,Input
SetVolumeChannel1 When using SeparateMono on an Audio Input, this can be used to set channel
volumes independently.
Value = Volume 0-100
Value,Input
SetVolumeChannel2 When using SeparateMono on an Audio Input, this can be used to set channel
volumes independently.
Value = Volume 0-100
Value,Input
SetVolumeChannelMixer Set Volume of an Input's sub channel (1 to 16)
Value = Channel,Volume 0-100
Value,Input
SetVolumeFade Set volume gradually over x milliseconds.
Value = Volume 0-100,Milliseconds
Value,Input
Solo Input
SoloOff Input
SoloOn Input
Transition
CutDirect Cuts the input directly to Output without changing Preview Input
FadeToBlack Toggle FTB On/Off None
QuickPlay Input
SetFader Set Master Fader T-Bar, 255 will cut to Preview
Value = Fader 0-255
Value
SetTransitionDuration1 Change Transition Duration for Button 1
Value = Duration MS
Value
SetTransitionDuration2 Change Transition Duration for Button 2
Value = Duration MS
Value