Instant replay, Image sequence / stinger, Video delay – vMix Live Production Software Pro User Manual
Page 54: Setup, Sound
vMix User Guide
54 / 208
Any MultiCorder recordings of this input will save the stream directly to file without using the compression
settings specified in the MultiCorder window.
Instant Replay
Full documentation on Instant Replay can be found below:
Image Sequence / Stinger
Image Sequence / Stinger can be used to automatically load a series of images as an animation.
This feature can be used to create animations with or without alpha channels that can be used as
vMix will automatically search for the next image in the list based on the filename of the selected file.
For example if the image is called image1.png then vMix will load image2.png, image3.png and so on, until
no more files can be found.
Sound
Sound can be added to an image sequence by creating an MP3 or WAV file and naming it to match the first
image in the sequence.
For example if the first image is image1.png then the sound file should be called image1.png.wav or
image1.png.mp3
This sound file will need to be in the same folder as the rest of the images.
The sound will then start playing each time the Image Sequence is played.
NOTE: When adding sound to an existing image sequence, the input will need to be added to
vMix again for it to be detected.
Video Delay
The Video Delay Input allows you to select a custom delay to the Output or a Capture Input.
This feature can be used to achieve many types of effects including slow motion replay.
Setup
Source:
Select either Output or an Input such as a Video Camera
Resolution:
Select the quality of the Video Delay. If you select a video camera to delay, this option will be
the same as the camera resolution.
Save Codec:
Select the Video Codec to use when saving clips from the Video Delay to file.
NOTE: DV Video Encoder supports a maximum resolution of 720x576, choose a different codec if
you wish to save video clips in HD