vMix Live Production Software Pro - Manual (Page 38)

vMix User Guide
38 / 208
5 + 6 This will send a stereo mix out over the output usually used for RearLeft-RearRight
VST devices may offer more than 3 outputs in mono or stereo (1+2) configurations which can also be
selected here.
When selecting a mono output, the stereo mix in vMix will be mixed down to mono automatically.
Default Bus for New Inputs
Advanced audio scenarios may require inputs to be sent to an auxiliary bus such as A and B when they are
added for the first time.
This default can be configured here.
Web Controller
See the Web Controller section for information about this tab.
Tally Lights
This section will cover using Tally Lights with Arduino based hardware.
For other tally light options see
Tally Lights
The Tally Lights settings can be used to specify the pin numbers for each tally light when using Arduino
based hardware.
Reset to Default: Reset to the default pin order as of vMix 2012 v4.
Reset to Legacy Mode: Revert to the pin order used in all previous versions of vMix.
Shortcuts
Add and edit Shortcuts here.
Click here to read the User Guide for Keyboard and Controller Shortcuts.