Plugins – vMix Live Production Software Pro User Manual
Page 80
vMix User Guide
80 / 208
These audio meters can be used to monitor the audio audio at the pre-effects stage (for any effects, volume
or gain, including delay)
and the post-effects stage (after all effects, volume, gain and delay have been applied)
Format
Displays the current audio format of the input
Channel
Select the audio channel to use for this input.
If you have a Microphone plugged into the left channel or right channel independently. Select
SeparateMono
here.
Separate mono allows you to adjust the volume of both mono channels independently from the Audio Mixer.
The audio from each microphone will be audible on both the left and right channels simultaneously.
For finer control of how different channels are mixed. See
Channel Mixer and Channel Matrix
below.
Gain
Select the gain (or amplification) in decibels.
Gain is added after the compressor. (See below)
Delay
Delay the audio source in milliseconds
Visible in Mixer
Untick this box to hide this Input from being displayed in the Audio Mixer.
Plugins
See
EQ