MITSUBISHI ELECTRIC 700 Series - Manual (Page 157)

152
Basic Instructions
Operation Errors
In the following case, operation error occurs and the error flag turns on.
• A1 or V has been specified at .
• The divisor is 0.
Program Examples
1) Program which stores the multiplication result of 5678 and 1234 in BIN to D3 and 4
when X5 turns on.
2) Program which outputs the multiplication result of the BIN data of X8 to F and the
BIN data of X10 to 1B to Y30 to 3F.
Program which outputs the quotient, obtained by dividing the data of X8 to F by 3.14,
to Y30 to 3F when X3 turns on.
∗
/
D
S2