Interphase Tech RAS Communications Controller 5536 - Manual (Page 120)

Setting Up RAS Support Properties
100 Interphase Corporation
In the Incoming Filter dialog box, call numbers to be accepted
by the ISDN RAS driver appear on the Filtering list. The driver
can accept up to 1,024 numbers. If the Filtering list is blank,
calling numbers will not be filtered for the driver.
You can add, replace, move, and remove incoming call
numbers to be accepted by the ISDN RAS driver, as described
in the topics that follow.
You can also access this dialog box for the Digital Modem
RAS Support driver. However, the filtering options are
unavailable.
Adding an Incoming Call Number
To add incoming calls to the Filtering list:
1. Type the incoming number in the New calling number
field.
2. Click Add.
Added numbers appear in the Filtering list in
chronological order.
Replacing an Incoming Call Number
To replace an incoming call number in the Filtering list:
1. Highlight the number to replace.
2. Type the new number in the New calling number field.
3. Click Replace.