Hardware management – Interphase Tech RAS Communications Controller 5536 User Manual
Page 96
Hardware Management
76
Interphase Corporation
Hardware Management
The Cards section of the WAN Adapters Setup dialog box
displays all the 5536 WAN boards installed in the machine,
their status, and their available communication ports. The
Firmware section displays information about the board
selected in the Cards section. You can use the buttons in the
Cards section to add, remove, or configure WAN boards.
N
OTE
If you change any firmware, card, or port properties, you
must apply changes, reload the firmware, save properties,
and restart the system, as described in
The board status is represented by its icon color:
Use the following buttons to set up board hardware:
LED Color
Meaning
Gray
The board is detected but is not working.
Yellow
The hardware configuration has been changed but not
applied.
Green
The board is running.
Click...
To do this...
Add
Add a new board to the operating system. This option is
enabled if one or more Interphase WAN cards can be
installed.
Remove
Remove an 5536 board. This option removes the board and
its drivers from the operating system.