Interphase Tech RAS Communications Controller 5536 - Manual (Page 122)

Setting Up Call Properties
102 Interphase Corporation
• From the Card Properties dialog box, click the Call
Setup button.
Following is the Call Setup dialog box.
Figure 6-6. Call Setup Dialog Box
This dialog box includes columns displaying call setup
properties on the left side and input fields to use for specifying
call properties on the right side.
Incoming calls are divided into the following categories:
• ISDN RAS support calls, which are managed by the
ISDN RAS Support driver and use one or two ISDN
ports
• Digital Modem support calls, which are subdivided into
the following categories:
– DM RAS support calls, which are managed by the
Digital Modem RAS Support driver and use the
RAS modem port
– Serial Driver calls, which are managed transparently
by the Serial driver and use emulated COM ports