Interphase Tech RAS Communications Controller 5536 - Manual (Page 39)

Chapter 2: Installing the Hardware
5536 PRI RAS Communications Controller Users Guide 19
Figure 2-2. Removing the Computer Cover
3. Locate a suitable PCI expansion slot, and remove the
screw that attaches the expansion plate to the computer.
Save the screw for Step
6 .
This board is a full-length PCI add-on card. Choose a
slot in which the board will not be in contact with other
elements of the motherboard, such as memory modules,
connectors, or the host processor’s heat sink.
C
AUTION
If you are installing on an MVIP bus, see Connecting to an
MVIP Bus on page 22 before continuing.
2 2
2