Interphase Tech RAS Communications Controller 5536 - Manual (Page 189)

Appendix D: Line Test Utility
5536 PRI RAS Communications Controller Users Guide 169
In such configurations, the clock of the local port must be in
slave mode, and the clock of the remote card must be in master
mode (which is the default clock type).
To set the clock mode:
1. Click Options on the Port Test Configuration dialog
box (shown in Figure D-2 on page 165 ).
The Port Options dialog box appears:
Figure D-4. Port Options Dialog Box
2. Select the clock setting you want to use.
3. Click OK to save the setting and return to the Port Test
Configuration dialog box.