Seiko Group TM-L60 - Manual (Page 11)

n Operation panel
Panel switches
POWER
Press the POWER button to turn the printer ON and OFF. When the button is
pushed down, the power is on. When pressed again, the button returns to its
original position, turning the power off.
l
Do not turn the power off during printing.
PAPER FEED
Press the PAPER FEED button to feed roll paper.
l
Pressing the PAPER FEED button recovers from waiting state of label
ejection command (GS FF) execution or from self-test printing standby state.
l
You cannot feed paper when the printer cover is open.
Panel Lights (LED)
POWER (green)
The POWER light is on when power is turned on.
ERROR (red)
The ERROR light is on when the roll-paper cover is not closed completely, or
when the paper roll is near the end. The light blinks during an error condition,
or in the print-waiting state (for macro execution or for self-test printing standby
state).
PAPER (red)
The PAPER light is on when roll paper is not loaded, on when the paper roll is
near the end.
5