The cover-open detector, Removing jammed paper, 6 the cover-open detector – Seiko Group TM-L60 User Manual

Page 30: 7 removing jammed paper

Advertising
background image

5-6 The Cover-open Detector

n

n The cover-open detector

This unit has an cover-open detector located inside the roll-paper cover.

l

Data is not printed when the printer cover is open.

l

Opening the cover sets the printer OFF-LINE; data cannot be received when the

printer is OFF-LINE.

l

Paper cannot be fed with the paper-feed switch when the roll-paper cover is

open.

l

Closing the cover sets the printer ON-LINE automatically.

NOTE:

The roll-paper cover cannot be closed unless the head-release lever and the

head-open lever are down.

5-7 Removing Jammed Paper

Remove jammed paper according to the following steps.

Open the roll-paper cover and raise the head-open lever.

CAUTION:

l

The print head is very hot immediately after printing.

Always remove jammed paper after the print head has cooled.

Or remove the screw and take the paper entrance away, instead of step .

Remove any jammed paper.

Push the head-open lever down. Reload roll paper and close the roll-paper

cover. See 3-1 to .

24

Advertising