Seiko Group TM-L60 - Manual (Page 46)

[Description] The pulse defined by nl and n2 is output on connector pin m.
l
m is specified as follows:
m Connector pin
0 Drawer kick-out connector pin 2
1 Drawer kick-out connector pin 5
l
ON time is nl X 2 ms and OFF time is n2 X 2 ms.
l
The circuit on the user side should be designed so that the
drawer drive duty is as shown below.
ON time
(ON time + OFF time)
[Notes]
[Default]
It is recommended that n2 be four times as much as nl or more.
l
If m is out of range, the printer reads n1 and n2 but does not
output a pulse.
Neither m, n1, nor n2 is defined.
ESC t n
[Name] Select character code table
[Format] <1B>H<74>H<n>
[Range]
[Description] Selects page n from the character code table.
[Default] n = 0
[Reference] APPENDIX D Character Code Tables
ESC u n
[Name] Transmit printer status
[Format] <1B>H<75>H<n>
[Range] n = 0
[Description] Transmit the current status of connector pin.
l
n is specified as follows:
n Connector pin
0 Drawer kick-out connector pin 3
40