Seiko Group TM-L60 - Manual (Page 71)

APPENDIX B Connectors
1. Connectors
Serial Interface Connector
Power Supply Connector Drawer Kick-out Connector
2. Interface connectors
See APPENDIX C Interfaces
3. Power supply connector
This connector is used to connect an external power source.
1) Pin assignment: Pin 1: +24 VDC
Pin 2: GND
Pin 3: Unconnected
2
S H E L L
1
3
SHELL: Connected to the frame ground (FG) at the
printer side.
2) Model: User side: Connector: TCP8927-63-1110
(Hoshiden or equivalent)
Cable: 2-core shielded (AWG22 X 2)
Printer side: TCS7960-53-2010 (Hoshiden or equivalent)
NOTE: Start the external power supply after connecting the external power
supply.
4. Drawer kick-out connector (Modular connector)
1) Pin assignment: Printer side connector: TM5RJ3-66 (HIROSE) or
equivalent
User-side plug: Standard 6-pin modular jack
(R11 Telephone jack)
Table B-l. Drawer Kick-out Connector Pin Assignment
Pin Number Signal Name Sender Connected to: Function
1 FG -
Cash drawer Frame ground
2
L1 (-)
Printer Cash drawer Drawer kick-out drive signal
L1.
65