Seiko Group TM-L60 - Manual (Page 24)

5-3 Miscellaneous Notes
n Notes on printing and paper feeding
(1) Because the TM-L60 is a line printer, it automatically feeds paper after printing
the data.
When the line spacing is set to a small value, the paper may be fed more than
the set amount to print the data.
For example, when the line spacing is set to 10 dots (10/180 inch), the printer
feeds just 10 dots for a carriage return; but 24 dots is fed when printing normal
characters using Font A. (Refer to Table 5-l.)
When all the characters on one line are rotated, refer to Table 5-2 for paper
feeding.
Table 5-1. Required Paper Feed Amount Dots
(When the line spacing is set to 10 dots)
Required Paper Feed Amount (dots)
Underline
without w i t h
Font A Normal characters 2 4 32
Double-height
4 8 5 3
Double-width 2 4 3 2
Quadruple 4 8 5 3
Font B Normal characters 1 7 2 4
Double-height 3 4 3 7
Double-width 1 7 2 4
Quadruple 3 4 3 7
Bit image 2 4
Table 5-2. Required Paper Feed Amount Dots
(When all the characters on one line are rotated)
Font A
Font B
Normal characters
Double-height
Double-width
Quadruple
Normal characters
Double-height
Double-width
Quadruple
Required Paper Feed Amount (dots)
12
24
12
24
9
18
9
18
18