Chap 2-before setting up, Connecting the power supply to the printer, Chapter 2 before setting up – Seiko Group TM-L60 User Manual
Page 12: 1 connecting the power supply to the printer
Chapter 2 Before Setting Up
2-1
Connecting the Power Supply to the Printer
n Plugging in AC adapter
The printer must be connected to an external power supply.
Be sure to use a power supply unit that matches the specifications.
CAUTIONS:
l
Before connecting the printer to the power supply, make sure that the
voltage (24 VDC) and power specifications match the printer’s require-
ments.
l
Using an incorrect power supply can cause serious damage to the printer.
Connect the power unit according to the following procedure.
Make sure the printer and the power unit are turned off.
Plug the power cable’s connector into the printer’s power connector with the
arrow mark facing downward.
l
Remove the power cable by grasping the connector firmly at the arrow mark
and pulling straight out.
Plug the power cord into an outlet, and turn on the power unit.
Power Cable Connector