Seiko Group TM-L60 - Manual (Page 33)

LF
[Name] Print and line feed
[Format] <OA> H
[Description] Prints the data in the print buffer and performs 1 line feed based
on the current line spacing.
l
Sets the print starting position to the beginning of the line.
[Reference] ESC 2, ESC 3, 5-3 Miscellaneous Notes
FF
[Name] Print and position label to start printing
[Format] <OC> H
[Description] Prints the data in the print buffer and positions the next label for
printing.
[Notes]
l
This command is effective only when label printing mode is se-
lected.
[Reference]
l
This command will not work correctly after a label has been
moved manually using the paper feed knob. Position the label
using the paper feed switch or issue GS <.
l
A FF or GS FF command must be sent after transmitting print
data for one label.
GS FF
ESC SP n
[Name] Set character right-side spacing
[Format] <1B> H <20> H <n>
[Range] 0 n 32
[Description] Sets the character right-side spacing in dot units (1/180 inch units).
[Notes]
l
The character right-side spacing for double-width mode is twice
the set value.
[Default] n = 0
ESC ! n
[Name] Set print mode
[Format] <1B> H <21> H <n>
[Range] 0 n 255
[Description] Sets a print mode.
27