Seiko Group TM-L60 - Manual (Page 37)

[Description] Sets the bit-image mode using m and the number of dots using
n1 and n2.
l
Divide the number of dots to be printed by 256. The integer an-
swer is n2 and the remainder is n1. Therefore, the number of
dots in the horizontal direction is: n1 + 256 X n2.
l
If the bit-image data input exceeds the number of dots to be
printed on a line, the excess data is ignored.
l
"d" indicates the bit image data. Set a corresponding bit to 1 to
print a dot, otherwise set it to 0.
l
The bit image modes selectable by m are as follows:
m Mode
Vertical Direction Horizontal Direction
Number of Dot Maximum
dots Density Density Number of Dots
Normal Label
0 8-dot single-density 8 60 DPI 90 DPI 192 184
1 8-dot double-density 8 80 DPI 180 DPI 384 368
32 24-dot single-density 24 180 DPI 90 DPI 192 184
33 24-dot double-density 24 180 DPI 180 DPI 384 368
[Notes]
.
If m is out of range, n1 and the data following will be processed
as normal data.
l
After printing a bit image, the printer returns to normal data pro-
cessing mode.
l
The relationship between the image data and the dots to be
printed is as follows:
Single-density Double-density
31