Seiko Group TM-L60 - Manual (Page 34)

V a l u e
B i t Function 0 1
0 Character font Font A Font B
1 Undefined
2 Undefined
3 Emphasized Canceled Set
4 Double-height Canceled S e t
5 Double-width Canceled Set
6 Undefined
7 Underline Canceled Set
[Note]
[Default]
[Reference]
l
Each bit of n is used as follows:
l
When both double-height mode and double-width mode are set,
quadruple characters are printed.
l
Underlines can be printed for all characters, but not for the
space skipped by an HT.
l
Underlines cannot be printed for 90° rotated characters.
l
The thickness of an underline is set by ESC - (default value =
1.)
n = 0
ESC E, ESC F, ESC -
ESC $ n1 n2
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
[Reference]
Set absolute position
<1B> H <24> H <n1> <n2>
0 n1 255
0 n2 1
Sets the print starting position to the specified number of dots
(1/180 inch units) from the beginning of the line.
l
Divide the number of dots by 256. The integer answer is n2 and
the remainder is n1. Therefore, the print starting position be-
comes n1 + n2 X 256 from the beginning of the line.
l
Any specification that exceeds the printable area is ignored.
Not defined
ESC ¥
28