Seiko Group TM-L60 - Manual (Page 50)

GS/m
[Name] Print down-loaded bit image
[Format] <1D>H<2F>H<m>
[Range]
[Description] Prints a down-loaded bit image using the mode specified by m.
l
m selects the print mode from the following table.
m M o d e Vertical Direction Horizontal Direction
Dot Density Dot Density
0 Normal mode 1 8 0 D P I 180 DPI
1 Double-width mode 180 DPI 90 DPI
2 Double-height mode 90 DPI 1 8 0 D P I
3 Quadruple mode 90 DPI 90 DPI
[Notes]
l
If any data is present in the print buffer, this command is ig-
nored.
l
If a down-loaded bit image has not been defined, this command
is ignored.
l
If the down-loaded bit image data exceeds one line, the ex-
ceeds image data will not be printed.
l
The user-defined characters and a down-loaded bit image can-
not be defined at the same time.
l
If the down-loaded bit image data exceeds label paper, it is
printed on the next label.
[Default] Not defined.
[Reference] G S *