Seiko Group TM-L60 - Manual (Page 45)

l
In the TM-L60, only the journal near-end detector can be se-
lected and only the lowest bit of n is valid.
[Notes]
[Default]
l
When a paper-end is detected by the journal detector, the
printer goes OFF-LINE after printing stops.
l
If a paper-end is detected by paper detectors when thermal label
paper is selected, the printer goes OFF-LINE after printing data
for one label.
n = 0
ESC c 5 n
[Name] Enable/disable panel switches
[Format] <1B>H<63>H<35>H<n>
[Range]
[Description] Enables or disables the paper-feed switch.
l
Only the lowest bit of n is valid.
When n = <* * * * * * * 0>B, the paper feed switch is enabled.
When n = < * * * * * * * 1>B, the paper feed switch is disabled.
[Notes]
l
If the panel switches are disabled by this command, the paper
feed switch is disabled. Therefore, paper cannot be fed with the
paper feed switch.
[Default]
n = 0
ESC d n
[Name] Print and feed paper n lines
[Format] <1B>H<64>H<n>
[Range]
[Description] Prints the data in the print buffer and performs n lines feeds.
l
Sets the print starting position to the beginning of the line.
l
The predetermined line spacing remains unchanged.
[Default] Not defined.
[Reference] 5-3 Miscellaneous Notes
ESC p m n1 n2
[Name]
[Format]
[Range]
Generate pulse
<1B>H<70>H<m><n1><n2>
m = O , 1
39