Siemens syngo CT 2005C - Manual (Page 250)

250
syngo 3D
Workflow for a CT Extremity
Examination
Using MPR/MPR Thick
1. Load the series to MPR.
2. Manipulate the volume to evaluate anatomy:
a)Orientate the image volume for the best view of
the anatomy.
b)Adjust the window as necessary.
c) Pan and zoom image as necessary.
3. Scroll through the volume quickly using the 3D
cross-hair or dog-ears to gain a three-dimensional
impression.
4. The minimum slice thickness of an MPR image is one
voxel, but you can generate thicker slices (MPR
Thick) for easier evaluation.
5. Measure, annotate and document as needed.
6. Optionally, create image series using parallel,
expanded or curved ranges and output them either
on a film or save them to the database.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 250 Friday, April 8, 2005 9:55 AM