Siemens syngo CT 2005C - Manual (Page 252)

252
syngo 3D
Workflow for a CT
Angiography
Using MIP/MIP Thin
1. Load the series to MIP.
2. Manipulate the volume to evaluate anatomy:
a)Orientate the image volume for the best view of
the anatomy.
b)To eliminate unwanted bone, either activate MIP
Thin or use VOI punching/3D Object Editor.
c)Adjust the window as necessary.
d)Pan and zoom image as necessary.
3. Measure, annotate and document as needed.
4. Optionally, create image series using radial ranges
for MIP; parallel, expanded or curved ranges for MIP
Thin and output them either on a film or save them
to the database.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 252 Friday, April 8, 2005 9:55 AM