Siemens syngo CT 2005C - Manual (Page 272)

272
syngo Dental CT
• Image orientation:
– In the paraxial view, a “B” indicates buccal and a “L”
lingual. The lingual marker “+” must always be
positioned at the tongue. If not, simply drag &
drop it back.
– In the panoramic view, a “B” stands for “Begin” and
an “E” for “End”.
• Filming: for the maximum use of the film, film
directly from the Dental card instead of Patient
Browser. For easy reprinting, the results of the most
recent syngo Dental CT Film are stored in the Patient
Browser in the folder “Film”.
• It is recommended to change the image windowing
on the virtual film sheet.
• A semi-automatic detection tool can be used to mark
and outline the mandibular canal on both paraxial
and panoramic images for easy viewing and filming.
• Multiple paraxial ranges can be defined on one refer-
ence image by “cluster & copy function”.
I.e., you can group a number of paraxial lines and
copy the lines to another location, e.g., over individ-
ual sockets at different locations.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 272 Friday, April 8, 2005 9:55 AM