Siemens syngo CT 2005C - Manual (Page 270)

270
syngo Dental CT
• It is mandatory to position the patient head in the
center of the scan field – use the lateral laser light
marker for positioning.
• Gantry tilt is not necessary since you have the ability
to tilt the reference line to generate an axial refor-
matted image at the desired plane. However, in
order to minimize the scan length for the same ana-
tomical region, it is recommended to position the
patient’s head at the appropriate scan plane when-
ever possible:
– For the upper and lower jaw:
occlusal plane in parallel to the scan plane.
– For either jaw:
jaw bone in parallel to the scan plane.
• It is recommended to end the exam first, and then
start the Dental evaluation.
User interface of syngo Dental CT
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 270 Friday, April 8, 2005 9:55 AM